Stage 4 post in my signature contain more info.
Update a 2nd time if the pictures are missing!
Damn tinypic hosting :banghead:
Started of with waiting for bolts and **** for 12 weeks and didn’t get the car ready until 7 days before the most important contest of the year "BUGRUN" .
Not being able to shift from 2nd to 3rd made the quart mile challenge suck .
We had power for 130mph traps but it couldn’t shift and we decided to cancel that competition and spent the day enjoying the rest of the cars .
Spending the rest of the summer creating a new 28psi E85 software took more time then I could imagine.
And with a slight disaster after a famous oil company gave us diesel instead of Alcohol we had to cancel even more shows .
Late august the new race file were ready for the street with stuff used from my Seat V5 we got the car ready for the quart mile LAZZAT race.
Test driving the car at WOT ~100mph the tires were spinning like crazy so we power shifted in to 4th gear (3.94 r&p) and it still didn’t find traction.
When I finally did ~124ish mph 4 gear broke instantly ...... ~midnight 1.5 hour drive from home. :banghead: :banghead:
So I called my transmission guy and asked him if the 3.38 R&P were ready .
Because we believe that hitting 130mph in third is the way to go in the quarter mile.
33hours of work and we built a new box and with engine part borrowed from the Toledo V5 we managed to get the car ready 5 days before LAZZAT .
Test drove the car for 4 days with 15psi before the 22psi software got a highway test .
It worked flawlessly and the performance were "mid 11s" with 125ish trap.
Great!
Lets try the 30 psi software in the middle of the night 6 hours before the contest .
Drove the car in second ~85mph and then I shifted to 3rd gear and got it in to 30% TB angle ...... let I climb to 100mph and stomped the gas .
30psi ...... hit at 4000ish rpm and the car just screamed when the WG opened .
Then 3rd gear went :banghead: :banghead:
So that car was towed to my garage 4 weeks ago and is still standing there.
BUT im still hungry and i got 3 new street softwares to try thanks to
Jeffrey Atwood a.k.a Jefnes3 and 2 new untested files from HGP tuner Wagner and 4 RACE Alcohol 35psi files from Claus @ turbocenter
So ....STAGE V began to take shape .
Im sick ....yes I know .
![Wink ;)](./images/smilies/icon_wink.gif)
1:1-4th RACE gear set from http://www.APtuning.com because it really sucks to be towed.
![Bild](http://i12.tinypic.com/2lcr2np.jpg)
2: GT3076R 0.86 Exhaust housing from http://www.Pagparts.com because 0.64 will not handle 35psi without getting sick backpressure.
![Bild](http://i12.tinypic.com/4h0b61t.jpg)
3:630cc injectors X 5 running at 4 bar FPR from http://www.usrallyteam.com
![Bild](http://i12.tinypic.com/4fvou44.jpg)
4:Exhaust wrap for the turbo manifold
5:Pauter rods http://www.pagparts.com
![Bild](http://i12.tinypic.com/2hqy0z8.jpg)
6:Going from a 7.2:1 CR to a 8.5:1 CR wiseco one from Arnold
![Bild](http://i12.tinypic.com/35j9qif.jpg)
Pic for views until a starts to get the stuff delivered
7:Et street 26x15 for events that have rules against slicks
![Bild](http://i14.tinypic.com/2m7hqub.jpg)
8:Et drag for real drag events
![Bild](http://i13.tinypic.com/4dditk0.jpg)
BILTEMA
![Bild](http://i7.tinypic.com/24czmgj.jpg)
Sneak preview of what´s up in the garage .
velocity tuned for 8000rpm peak .
More pics of the rest of the plenum tomorrow
![Bild](http://i10.tinypic.com/3y7gysy.jpg)
![Bild](http://i9.tinypic.com/2rxikxc.jpg)
Here is the new plenum.
Its cone shaped for more even distrubution.
Hard to see in the pictures but its actually going fron 110mm diam to 150mm diam. (US 4,4inch---->6inch
And its 530mm long =HUGE
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Bild](http://i15.tinypic.com/2u5swuv.jpg)
![Bild](http://i9.tinypic.com/2j1o0w9.jpg)
![Bild](http://i4.tinypic.com/29o1ttf.jpg)
![Bild](http://i7.tinypic.com/4gpjr4w.jpg)
![Bild](http://i9.tinypic.com/2mn50xt.jpg)
Plenum update.
Kone+stacks+endcap are now welded.
The TIG had a broken back cap and i didnt have the right weld rod for this but PRO welder Mattias Olsson managed to do this in my garage WITH A BROKEN thumb due to a saw accident :laugh: .
Im very satesfied with the result . :thumbup: :thumbup:
Now i only have to cut the flange for the throttle body and put some bungs on/wire holder for TB .
Lower flange will be removed and adjusted because stuff like this tend to move a bit when you do a slappy pre work :laugh:
![Bild](http://i10.tinypic.com/4fwya1u.jpg)
![Bild](http://i15.tinypic.com/2nurg8y.jpg)
![Bild](http://i15.tinypic.com/2h3r144.jpg)
Some serious polishing is needed for this sucker
performance comes first .....and performance is not the easy way because everything is harmonicly tuned for 5000-8000rpm .
Ther is only ONE WAY to make each lenght for example intake runner stack , cylinder head port area ,cam duration , exhaust manifol ´runner lenght .
and ist not the space efficient way :banghead: :banghead:
![Bild](http://i9.tinypic.com/2qjzt6u.jpg)
![Bild](http://i15.tinypic.com/4cimdme.jpg)
![Bild](http://i15.tinypic.com/49bfkat.jpg)
![Bild](http://i15.tinypic.com/2yyave9.jpg)
![Bild](http://i15.tinypic.com/30w3wg1.jpg)
Some stuff arrived today
First
PAUTERS!!!!!!!!!!
70% weight of OEM rods
![Surprised :eek:](./images/smilies/icon_surprised.gif)
![Bild](http://i7.tinypic.com/2h3ybdw.jpg)
PAG PART special GT3076 with 60A/R compressor housing and 0.86 exhaust housing.
compared to 50A/R .64
![Bild](http://i7.tinypic.com/2da12qq.jpg)
![Bild](http://i7.tinypic.com/486wnk0.jpg)
![Bild](http://i10.tinypic.com/2gwuezr.jpg)
MISC bling !
![Bild](http://i10.tinypic.com/2uxxuoj.jpg)
3.5inch RS4 maf looks small
![Wink ;)](./images/smilies/icon_wink.gif)
TIAL silicone and TIAL BOV + alot of heat wrap . :thumbup:
![Bild](http://i10.tinypic.com/3yy6wdv.jpg)
![Bild](http://i10.tinypic.com/2ia6ef9.jpg)